Sold Out
Get stronger, more reliable 5GHz wireless performance with the Tenda Dish Antenna ANT30-5G, designed for 4900–6500 MHz operation. This antenna delivers 30dBi gain and uses dual polarity with both vertical and horizontal polarization, helping support PtP wireless connections. The horizontal beamwidth is 6° (6dB) and the vertical beamwidth is also 6° (6dB), with an elevation beamwidth of 5°. With a front-to-back ratio greater than 35dB and isolation greater than 25dB, the antenna is built to help improve signal directionality and separation. It also specifies VSWR of ≤ 2.0 and a...
The Mimosa B11 point-to-point backhaul radio (10.0–11.7 GHz) is built for modern internet-era backhaul, with support for adapting to variable upstream and downstream bandwidth requirements. It is designed to help meet high-throughput IP performance needs while also addressing low-latency demands. The B11 provides max throughput up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY) and 750 Mbps IP aggregate running in TDMA-FD mode typically required in ETSI markets. With a low latency of < 1 ms and TDMA/TDMA-FD operation, it’s suited to backhaul links where responsiveness matters. For installation...
The Tenda Access Point Outdoor CPE O9 is designed for 5GHz WiFi 6 deployments and supports IEEE 802.11a/n/ac standards. With a maximum wireless rate of 867Mbps and a wireless rate of 450Mbps (pole mount), it’s built for scenarios where reliable outdoor connectivity is needed. The device features working modes including AP/Station/WISP/P2MP/WDS Repeater/Router, giving you multiple deployment options. For setup and control, it includes features such as remote web access, schedule reboot, firmware upgrade, backup/restore configuration, and managed-by-controller operation. It’s suitable for private ISP access or CCTV surveillance, as stated in...
Tenda Point to Point O3 Poe N150 outdoor CPE is designed for 2.4GHz wireless connectivity with IEEE 802.11b/g/n support. It offers a maximum wireless rate of 150Mbps with a 20/40MHz channel bandwidth and 2.4GHz frequency range, making it suitable for point-to-point and point-to-multipoint links. Deployment is supported via Pole Mount/Wall Mount, helping you place the unit where it fits your setup. The product is positioned for private ISP access or CCTV surveillance, with multiple operating modes including AP, Station, WISP, P2MP, WDS Repeater/Router, and additional bridging capabilities. Built with a...
A robust outdoor wireless access point is delivered by the Tenda OAP1200, designed to provide fast dual-band WiFi plus gigabit Ethernet for demanding outdoor networking. Featuring AC1200 standards, the device is capable of simultaneous 2.4 GHz and 5 GHz transmission that reaches up to 1167 Mbps in total, making it suitable for high-bandwidth applications like outdoor surveillance, guest WiFi in outdoor venues, or long-range wireless bridging. With two external high-gain antennas, strong signal is maintained over extended distances, even in open-air conditions. The enclosure is weatherproof, rated IP65, preventing damage...
A high-performance outdoor CPE is offered by the Tenda O8, built for long-distance wireless point-to-point (PtP) or point-to-multi-point (PtMP) connections over 5 GHz. This device delivers speeds up to 433 Mbps using the 802.11ac standard, and is equipped with a 23 dBi directional antenna which allows stable signal over many kilometers. Weather resistance with IP65 rating and lightning protection ensures that reliable connectivity is provided even in harsh outdoor environments. Signal loss and interference are reduced through features such as channel shift and proprietary TDMA protocol, which coordinate traffic and...
A rugged outdoor access point is provided by the Tenda O6 for extending wireless network across long distances on the 5 GHz band. It supports N450 class speed and uses a high-gain 16 dBi directional antenna to focus signal, enabling stable point-to-point or point-to-multipoint connections. The unit is enclosed in a waterproof housing rated IP65 and includes lightning protection so that reliable operation is ensured under harsh weather conditions. Installation is simplified through PoE (Power over Ethernet), allowing both power and data to be transmitted over a single cable. Gigabit...
A reliable outdoor wireless bridge is offered by the Tenda O4, which is designed to deliver fast 5 GHz AC867 connectivity in harsh conditions. With its 12 dBi directional antenna and Gigabit Ethernet port, strong wireless performance is enabled over significant distances while wired devices maintain full speed. The IP65-rated housing ensures that rain, dust and strong sunlight do not degrade signal or hardware, while built-in surge protection increases durability under electric storm conditions. Setup is carried out without much effort: power and data can be provided over a single...
A rugged 5 GHz outdoor base station is provided by the Tenda B6, offering N300 wireless speeds to support long-range point-to-point (PtP) and point-to-multipoint (PtMP) links. With dual external RP-SMA antenna connectors, signal reach is enhanced and flexible antenna options are allowed, so a stronger directional or sector antenna may be attached to suit connection distance or environment. Operation is made cleaner via passive PoE, enabling both power and data to be delivered over a single cable, reducing installation complexity. Weather-resistance and electrical protection are emphasized. The B6 is built...
The TP-Link CPE710 is an advanced 5GHz outdoor wireless CPE designed to provide exceptional performance for long-range point-to-point (PtP) and point-to-multi-point (PtMP) wireless applications. Operating on the 802.11ac standard, this device offers speeds up to 867Mbps, ensuring reliable high-speed connections for outdoor networks. With its 23dBi high-gain directional antenna and 2×2 MIMO technology, it is well-suited for remote locations that require long-distance connectivity. Built for durability, the CPE710 features a robust IP65 weatherproof enclosure, making it resistant to water, dust, and harsh environmental conditions. Enhanced by 15kV ESD and 6kV...
The Xiaomi 5G CPE Pro Router brings ultra-fast internet speeds and reliable connectivity to your home with its advanced 5G capabilities and Wi-Fi 6 technology. Designed to support both SA/NSA dual-mode networking and major global 5G frequency bands, this router ensures a stable and smooth online experience whether you're streaming, gaming, or working from home. Its ability to convert 4G/5G signals into Wi-Fi means you can enjoy high-speed internet even in areas lacking traditional broadband infrastructure. Boasting speeds up to 5378 Mbps with its dual-band Wi-Fi 6 support, the Xiaomi...
The MikroTik PowerBox is a robust outdoor router designed to offer reliable connectivity and power management in demanding environments. Featuring five Ethernet ports, this device supports PoE output on four of its ports, allowing it to power up to four PoE-capable devices such as the MikroTik SXT or other similar equipment. The PowerBox is encased in a weatherproof enclosure, making it suitable for outdoor installations on towers or other exposed locations. The router is powered by a 650MHz CPU and is equipped with 64MB of RAM, ensuring stable and efficient...
The MikroTik PowerBox Pro is an advanced outdoor router designed to meet the demanding needs of network installations in various environments. This device features five Gigabit Ethernet ports and provides PoE output on four of these ports, offering power to PoE-capable devices while simplifying the setup with fewer power adapters and cables. Its weatherproof enclosure ensures durability and reliable performance in outdoor settings, including towers and poles. Equipped with a powerful 800MHz CPU and 128MB of RAM, the PowerBox Pro is capable of handling complex configurations and advanced features supported...
The MikroTik NetPower 16P is an advanced outdoor network switch designed for robust and reliable performance in challenging environments. This high-capacity switch features 16 Gigabit Ethernet ports with Power over Ethernet (PoE) capability, providing power to connected devices like access points and IP cameras. With two SFP+ ports, it supports high-speed 10G fiber uplinks, ensuring seamless and efficient data transmission for demanding network setups. The NetPower 16P is engineered with a durable and compact enclosure that withstands harsh outdoor conditions, including moisture and extreme temperatures. Its versatile mounting options make...
The MikroTik Wireless Wire nRAY (nRAYG-60adpair) represents the pinnacle of 60 GHz point-to-point wireless technology, offering fiber-like speeds over distances up to 1500 meters. This innovative kit includes two pre-paired devices that establish a secure, AES-encrypted connection effortlessly. Designed with the latest antenna technology, the nRAY provides enhanced durability and reliability, even in challenging environments. Its compact and streamlined form factor is ideal for snowy regions, preventing snow accumulation from disrupting signal quality. The nRAY features a powerful ARM64 dual-core CPU running at 1 GHz, ensuring high-speed throughput and consistent...
The MikroTik Wireless Wire Dish (RBLHGG-60adkit) provides an innovative solution for achieving fiber-like speeds without the need for physical cables. Designed for distances up to 1500 meters, this advanced kit delivers up to 2 Gb/s aggregate throughput, leveraging the 60 GHz frequency band to bypass the crowded WiFi spectrum. This results in a stable, high-speed wireless link ideal for both residential and commercial applications. The kit includes two pre-configured LHGG-60ad devices that establish a secure, AES-encrypted connection automatically upon powering on. Included in the package are power supplies, PoE injectors,...
Discover seamless connectivity with the MikroTik CubeSA 60Pro ac sector antenna, designed to enhance your network with high-speed 60 GHz performance. This advanced sector antenna supports point-to-multipoint configurations and delivers fiber-like speeds across distances up to 600 meters. Its compatibility with the 802.11ay standard ensures extended range and stability, making it ideal for large-scale events, temporary setups, and dynamic environments. The CubeSA 60Pro ac features a robust 5 GHz backup connection to mitigate potential disruptions during adverse weather conditions. Its compact and durable design includes a metal base for improved...
Meet the MikroTik Cube 60G ac, your go-to solution for high-speed wireless connectivity in expansive and challenging environments. Designed to tackle interference and signal loss, this cutting-edge CPE operates on the 60 GHz frequency band, delivering fiber-like speeds over distances of up to 800 meters. Its exceptional performance is enhanced by a 5 GHz backup connection, ensuring uninterrupted service even in adverse weather conditions. The Cube 60G ac is engineered with a compact and durable design that minimizes visual impact while maximizing functionality. Whether you're managing networks in parks, stadiums,...
The MikroTik RBcAPGi-5acD2nD-XL is a sleek and high-performance ceiling-mounted access point designed for optimal wireless coverage and minimal visibility. Ideal for environments where discreet placement is essential—such as offices, hotels, or public spaces—the cAP XL ac offers a low-profile design that blends seamlessly with its surroundings. This advanced ceiling AP supports dual-band, dual-chain wireless connectivity with a combined data rate of up to 1200 Mbps. Its high-gain antennas and built-in reflector significantly enhance coverage, extending the range by up to 100% compared to previous models. The cAP XL ac ensures...
The MikroTik RBcAP2nD is a sleek and efficient ceiling-mounted access point designed for 2.4GHz wireless networks. With its inconspicuous design, this ceiling AP is ideal for deployment in environments such as hotels, airports, shopping malls, and other hospitality venues. The cAP-2nD supports 802.11b/g/n standards, ensuring broad compatibility and reliable performance. This access point integrates seamlessly with MikroTik's CAPsMAN (Controlled Access Point System Manager), allowing centralized management of multiple APs from a single RouterBOARD device—eliminating the need for a separate controller machine. The RBcAP2nD is designed to be easily installed with...
