Neewer CA065 Triple Suction Cup Car Mount

The NEEWER CA065 Triple Suction Cup Car Mount is designed for capturing immersive POV footage and dynamic driving videos from a variety of vehicle-mounted angles. A camera or action camera can be securely positioned on an engine hood, windshield inside or outside, dashboard, or vehicle side using three powerful 3-inch suction cups. A sturdy triangular mounting structure is formed for reliable support, while flexible camera positioning is provided through extension poles and a dual ball head magic arm. A safety lanyard is also included for additional security during recording. For safer operation, the mount should be used at speeds below 80 km/h to help prevent accidental drops.

Greater shooting flexibility is provided through a four-section telescopic extension pole, which can be extended from 12.6" (32 cm) to 43.3" (110 cm). Two 360° rotatable ball heads can be adjusted to achieve different filming perspectives, while the single suction cup mount allows 180° front and back adjustment. Standard 1/4" mounting screws allow various mirrorless vlog cameras, camcorders, phone holders, and action camera adapters to be attached, making the NEEWER CA065 suitable for automotive filmmaking, action videos, POV recording, vlogging, and creative vehicle-mounted shots.

Key Features

• Triple Suction Cup Car Mount System: Three 3" (74 mm) suction cups are used to form a stable triangular mounting structure, allowing cameras to be positioned on suitable vehicle surfaces for dynamic footage.
• Quick Release Suction Cups: Powerful grips can be created by pressing the suction cups onto the mounting surface. Indicator lines are provided for easier setup, while quick removal can be achieved by pulling upward on the two buttons of each suction cup.
• Dual & Single Suction Cup Configurations: A dual suction cup mount is connected through a U-shaped bracket, while a separate single suction cup mount is included. Combined or standalone configurations can therefore be used depending on the required shooting setup.
• 360° Dual Ball Head Adjustment: Two 360° rotatable ball heads are integrated into the magic arm, allowing the camera angle to be adjusted freely. The magic arm can also be attached to the top U-shaped bracket through a 1/4" thread.
• 180° Single Cup Adjustment: The single suction cup mount can be adjusted 180° forward and backward through the thumb screw, allowing additional positioning flexibility.
• 12.6"–43.3" Telescopic Extension Pole: A four-section extension pole can be adjusted from 12.6" (32 cm) to 43.3" (110 cm). It can be connected to the single suction cup mount through a 1/4" screw and secured to the magic arm using the adjustable clamp.
• Selfie Stick Function: The telescopic extension pole can also be used as a selfie stick. A maximum load of 11 lb (5 kg) is supported under applicable mounting conditions. When the selfie stick is extended to its maximum length, a weight capacity of 2.2 lb (1 kg) is specified.
• Short Extension Pole Included: A 2.75" (7 cm) short extension pole is supplied to provide additional mounting and positioning options.
• Adjustable Magic Arm Clamp: A maximum adjustable clamp opening of 0.95" (24 mm) is provided to help secure the telescopic extension pole.
• Standard 1/4" Mounting Points: Standard 1/4" screws are provided for use with compatible mirrorless vlog cameras, camcorders, phone holders, action camera adapters, and other supported equipment.
• Wide Action Camera Compatibility: Compatibility is provided for devices including DJI OSMO 360, Action 6, 5 Pro and 4; GoPro Hero13, Hero 12, 11, 10 and 9 Black; GoPro Max and Max 2; Insta360 X5, X4, X3, X2, Go 3S and Ace Pro; and AKASO Brave 8 and 7, among other compatible devices. Only an action camera mount adapter is included.
• Designed for Vehicle Video Recording: POV driving footage can be captured from locations such as the engine hood, windshield, dashboard, and vehicle side, making the system suitable for automotive filmmaking and action-camera recording.
• Safety Lanyard Included: Additional security can be provided through the included safety lanyard. The mount should be operated at speeds below 80 km/h to reduce the risk of accidental drops.
• Durable Construction: Aluminum alloy and rubber are used as the main materials to provide a combination of structural support and suction performance.

Surface Care Note: If residue is left on vehicle or desktop surfaces after use, it should be cleaned with alcohol.

Specifications

• Model: CA065
• Item Type: Suction Cup Car Mount
• Compatibility: For DJI Hero Osmo Action
• Application: Video & Film
• Main Features: Triple Cups, Versatile Poles
• Mounting Points: 1/4" Screws
• Main Material: Aluminum Alloy, Rubber
• Suction Cup Dimensions: φ3" (74 mm)
• Weight: 2.4 lb / 1.1 kg
• Telescopic Extension Pole Length: 12.6"–43.3" / 32–110 cm
• Short Extension Pole Length: 2.75" / 7 cm
• Maximum Adjustable Clamp: 0.95" / 24 mm
• Maximum Load: 11 lb / 5 kg
• Maximum Load with Selfie Stick Fully Extended: 2.2 lb / 1 kg
• Recommended Maximum Vehicle Speed: Below 80 km/h
• Ball Head Rotation: 360°
• Single Suction Cup Adjustment: 180° front and back

Package Contents

• 1 × Single Suction Cup Mount
• 1 × Dual Suction Cup Mount
• 1 × Telescopic Extension Pole
• 1 × Short Extension Pole
• 1 × Action Camera Adapter
• 2 × L-Shaped Hex Keys

Conclusion

The NEEWER CA065 Triple Suction Cup Car Mount Kit is built as a flexible mounting solution for POV driving videos, automotive filmmaking, action camera recording, and creative vehicle shots. Strong triple suction cups, 360° adjustable ball heads, single and dual mounting configurations, telescopic and short extension poles, and standard 1/4" mounting points are combined in one versatile system. With support for a wide range of action cameras and recording devices, multiple shooting perspectives can be achieved while a stable and adjustable mounting setup is maintained.