Xiaomi Robot Vacuum S10+

Xiaomi Robot Vacuum S10+ Dual-pad pressure mopping for better stains removal Thorough vacuuming 4000Pa Powerful suction fan...
Vendor: Xiaomi
SKU: BHR6366EN-SD23-JAA
Availability: Many In Stock
Product Type: Accessories
$400.00
$450.00
$400.00
Please hurry! Only 0 left in stock
Subtotal: $400.00
Xiaomi Robot Vacuum S10+

Xiaomi Robot Vacuum S10+

$450.00 $400.00

Xiaomi Robot Vacuum S10+

$450.00 $400.00

Xiaomi Robot Vacuum S10+

Dual-pad pressure mopping for better stains removal

Thorough vacuuming

4000Pa Powerful suction fan blower

Effective mopping

Pressure mopping with constant moisture

Fewer collisions

3D obstacle avoidance

Precise navigation

LDS laser navigation system

Smart control

Support customised cleaning patterns

Core performance upgraded

Stronger fan blower suction and longer battery life

4000Pa Powerful suction fan blower

Vacuum dust and debris in one go
Stronger fan blower suction power allows you to clean your home more efficiently. With the 4000Pa fan blower suction power, your daily cleaning needs can be met easily. The 4 suction power settings allow you to clear away dust, hair and large particles in one go.

Up to 2 hours of battery life Easily handle large homes

5200mAh nominal battery capacity. Last up 2 hours in Standard mode, offering you greater peace of mind. The robot is capable of cleaning over 200 areas with one pass in Standard mode, more than enough to handle large rooms.

New mode simulating manual mopping

Pressure mopping at constant moisture Effectively remove stains, 4 times the cleaning power


The dual mop pads rotate at high speeds to simulate the effect of manual pressure mopping, greatly improving the cleaning power and effectively removing wet, dry and other stains.

Double-layer composite mop pads Strong water absorption and effective removal of stains

Mop pads made of woven fabrics (80% polyester + 20% modified polypropylene fibre) retain moisture evenly.
Powerful cleaning performance effectively removes floor stains when mopping and can effectively protect floor surfaces throughout the house.

Large-capacity smart electronic control water tank Mop floors up to 150㎡ in one pass

Smart electronic control water tank with increased 200ml capacity releases water evenly without leakage.
Constant moisture mopping for up to 80 minutes, sufficient to meet the floor cleaning needs of a 150㎡ household in one pass.
3D obstacle avoidance

Fewer collisions even in dim-light environments

Millimetre-level obstacle identification. No more than 5mm* margin of error between detected distance and actual distance.

The robot precisely avoids obstacles and protects painted furniture surfaces, significantly reducing the risk of getting stuck and ensuring fewer collisions even in dim-light environments.

Carpet edge identification

To prevent mounting the carpet when mopping

When the robot works in the Mopping mode, the robot will automatically avoid the carpet so that the mop pads do not soak it.

Laser navigation with scanning of the entire house. Accurately plan cleaning routes

With the assistance of dual-line laser and LDS LIDAR, the robot can carry out 360° scanning of rooms and quickly build a map, regardless of room lighting conditions, then accurately plan the cleaning route without any omission or error.

Specifications:

Vacuum Specifications:
  • ModelB105
  • Item Dimensions350×350×97 mm
  • Rated Power55 W
  • Charging Time: Approx. 6 hours
  • Net Weight (with Accessories): 4.4 kg
  • Net Weight (Robot Vacuum)3.8 kg
  • Battery4800 mAh (Rated Capacity), 5200 mAh ( Nominal Capacity )
  • Rated Voltage: 14.4 V⎓
Charging Base Specifications:
  • Model: CDZ2101
  • Item Dimensions130×126×93 mm
  • Rated Input100-240 V~50/60 Hz 0.5 A
  • Rated Output: 19.8 V⎓1 A
Package contents:
  • Robot Vacuum×1
  • Brush×1
  • Brush Cover×1
  • Dust Compartment×1
  • Water Tank×1
  • Side Brush×1
  • Cleaning Tool×1
  • Power Cord×1
  • Mop Pad × 2 (Pre-installed)
  • Mop Pad Holder×2
  • Charging Dock×1
Drop sensorUsed to detect steps and drops, Robot will back up when the sensor detects a drop in height against typical media of approximately 85mm (white) or 15mm (black)
Ultrasonic sensorUsed to identify carpet material
LDS laser sensorUsed in image formation, Model in use is the D2M, the corresponding measurement distances are White: 0.15–8m and Black: 0.15–4m
Line laser sensorUsed to detect small obstacles, Laser can reach 50–400mm in a straight line
AI Visual identification sensor: Used to detect certain obstacles and furniture.
Extended edge sensorUsed along the wall
IMU SensorRobot vacuum motion status detection, Motion can be detected in the following areas:Acceleration ranges ±2g/±4g/±8g/±16g,Gyroscope ranges from ±125°/s to ±200°/s
Drive wheel lift sensorUsed to detect if drive wheel is off the ground, Detects if wheels are lifted and triggers the drive wheel to stop if lifted in motion
Air pressure sensor: Test for dust collection capacity and blocked ducts

Shipping Policy

We can ship to all over Lebanon, Through our delivery drivers for Beirut district, and by Libanpost for outside Beirut district orders.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the product options you chose. Depending on the shipping provider, shipping date would be provided when contacting us through our phone numbers provided in the Contact us section.

Please also note that the shipping rates for many items we sell are location based.

Refund Policy

We have a 3-day return policy, which means you have 3 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging unsealed You’ll also need the receipt or proof of purchase.

To start a return, you can contact us. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

Damages and issues Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / non-returnable items

Certain types of items cannot be returned, like perishable goods (such as headest ,earphone,network card wifi routers ), custom products (such as special orders or personalized items), and pre ordered goods ). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

Refunds

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

Related Products

Recently Viewed Products