Meta Pixel
SYNC|A_MEDIA|gid://shopify/MediaImage/39845432492284
SYNC|A_MEDIA|gid://shopify/MediaImage/39845423841532
SYNC|A_MEDIA|gid://shopify/MediaImage/39845423808764
SYNC|A_MEDIA|gid://shopify/MediaImage/39845423775996
SYNC|A_MEDIA|gid://shopify/MediaImage/39845423743228
SYNC|A_MEDIA|gid://shopify/MediaImage/39845432492284

Anker soundcore Space 2 - Noise Cancelling Headphones

$135.00
$150.00

Quantity

1
Subtotal: $0.00

  • Vendor: Anker
  • SKU: D1402-SD26-K
  • Availability: In Stock
  • Product Type: Headphones & Headsets

  • VAT: Excluding VAT

The Anker soundcore Space 2 Noise Cancelling Headphones are designed for comfortable all-day listening, travel, work, calls, and entertainment. Advanced low-frequency noise reduction is provided through a 4-stage noise cancelling system, allowing environmental sounds such as jet engine noise to be effectively reduced. Adaptive ANC 3.0 is included, while enhanced noise sensors, an upgraded processor, an optimized acoustic chamber, and double-layer diaphragm drivers are combined to provide more precise noise control.

High-quality audio is delivered through 40 mm double-layer diaphragm drivers, allowing clear high frequencies and powerful bass to be reproduced. Hi-Res Audio can be enjoyed through wired or wireless listening, while LDAC transmission is supported for compatible Android devices. Long listening sessions are supported with up to 70 hours of playtime, while up to 50 hours can be provided under the specified operating mode. When power is needed quickly, up to 4 hours of playback can be provided from a 5-minute charge.

Comfort and convenience are also prioritized for daily use. Wearing detection, Transparency Mode, physical button controls, built-in white noise, dual-device connectivity, AI-enhanced calls, and soundcore app customization are provided. A Bluetooth 6.1 connection is used for stable switching between two connected devices, while smart AI features including Anka and real-time translation for more than 100 languages can be accessed through the soundcore app.

Key Features

Adaptive ANC 3.0 with 4-Stage Low-Frequency Noise Cancelling

Environmental noise, particularly low-frequency sounds such as jet engine noise, is reduced through an enhanced 4-stage noise cancelling system. The system is built around enhanced noise sensors, an upgraded processor, an optimized acoustic chamber, and double-layer diaphragm drivers.

Stage 1: Enhanced Noise Sensors

Two noise-detecting microphones on each side are used to capture surrounding noise with improved accuracy, allowing unwanted environmental sounds to be detected more effectively.

Stage 2: Upgraded Processor

A cleaner signal is delivered by the upgraded processor. Up to 2× cleaner signal clarity than the previous generation is provided, allowing noise control to be performed more precisely.

Stage 3: Optimized Acoustic Chamber

Low-frequency noise reduction is improved through an optimized acoustic chamber, allowing sounds commonly experienced during travel to be handled more effectively.

Stage 4: Double-Layer Diaphragm Drivers

More accurate anti-noise signals are generated through custom-tuned double-layer diaphragm drivers, supporting the overall noise cancelling performance.

All-Day Comfort

First-class comfort is designed to be provided during extended listening sessions. A soft, comfortable fit is used so the headphones can be worn for longer periods while travelling, working, studying, or relaxing.

40 mm Double-Layer Diaphragm Drivers

High-fidelity audio is produced through 40 mm double-layer diaphragm drivers. High notes are sharpened, while bass response is deepened for a more detailed and powerful listening experience.

Hi-Res Audio and LDAC

High-Resolution audio can be enjoyed through wired or wireless listening. With LDAC, up to three times more audio data can be transmitted compared with the standard SBC codec, helping additional audio detail to be preserved on compatible devices.

Notes:

  1. The Hi-Res Audio logo and Hi-Res Audio Wireless logo are registered trademarks or otherwise trademarks of Japan Audio Society.
  2. LDAC enables audio content to be transmitted at a maximum bitrate of 990 kbps, which is three times the data transmission rate of the standard SBC codec at 328 kbps. LDAC is compatible only with Android devices and can be enabled in the soundcore app. LDAC and the LDAC logo are trademarks of Sony Corporation.

Built-In White Noise

White noise can be activated with one tap by enabling Nap Mode in the soundcore app. Calls can also be silenced so distraction-free rest can be maintained.

Long Battery Life and Ultra-Fast Charging

Up to 70 hours / 50 hours of playtime is supported, depending on the operating conditions. When the battery is depleted, a quick 5-minute charge can provide up to 4 hours of playback.

Battery and charging notes: Battery playtime data was obtained from the soundcore lab with wearing detection turned off and continuous audio playback at 50% volume. Actual playtime may vary depending on factors such as volume, audio source, environmental interference, and usage habits. Fast charging data was obtained from testing in the soundcore lab using a 5V/1A charger and the included charging cable. After a 5-minute charge from a fully drained battery, music could be played continuously for 4 hours at 50% volume with ANC turned off.

Wearing Detection

Playback can be managed through wearing detection after the feature has been enabled in the soundcore app before first use. Wearing status is detected by the visible sensor located inside the ear cup.

Intuitive Physical Button Controls

Playback volume and listening modes can be controlled through physical buttons. Additional control customization can be performed through the soundcore app.

Transparency Mode

Surrounding sounds, conversations, and announcements can be heard more clearly without the music having to be stopped, making the headphones more practical for travel and everyday environments.

Bluetooth 6.1 Dual Connection

A Bluetooth 6.1 connection is provided, and two devices can be connected for seamless and stable switching between them.

soundcore App Customization

The listening experience can be personalized through the soundcore app. EQ settings can be fine-tuned, hearing protection limits can be configured, and additional headphone functions can be customized.

Smart AI Features

Intelligent features can be enabled through the soundcore app, including Anka personal AI assistant and real-time translation for more than 100 languages.

Notes:

  1. The wake word “Hey Anka” cannot be customized.
  2. Android users are required to keep the soundcore app running in the background.
  3. AI-generated responses are provided for reference only and may contain inaccuracies or biases, particularly regarding political or sensitive topics. Information should be independently verified when necessary.

3-Mic AI Clear Calls

A 3-microphone AI-powered calling system is used to capture the user's voice while surrounding noise is filtered out, allowing clearer and more natural voice communication to be provided during calls.

Travel-Ready Design

A compact and sturdy design is provided for travel and everyday portability, allowing the headphones to be carried conveniently during flights, commuting, work, and other journeys.

Specifications

Product: Anker soundcore Space 2
Playtime: 70H / 50H
Sound: 40 mm Double-Layer Diaphragm
Active Noise Cancellation: Adaptive ANC 3.0
Noise Cancelling System: 4-Stage Low-Frequency Noise Cancelling System
Fast Charging: 5 Mins = 4 Hrs
Calls: 3 Mics with AI Enhancement
Multipoint Connection: ✔️
Bluetooth: Bluetooth 6.1
Weight: 264 g (9.31 oz)
Audio Support: Hi-Res Audio, Hi-Res Audio Wireless, LDAC
LDAC Maximum Bitrate: 990 kbps
Standard SBC Codec Bitrate: 328 kbps
White Noise: Built-In White Noise via Nap Mode
Wearing Detection: Supported
Transparency Mode: Supported
Physical Button Controls: Supported
App Customization: soundcore app
Smart AI Features: Anka Personal AI Assistant, Real-Time Translation for Over 100 Languages
Dual Connection: Supported

Conclusion

The Anker soundcore Space 2 Adaptive Noise Cancelling Headphones are designed as a versatile option for travel, commuting, work, calls, and extended everyday listening. Powerful low-frequency noise reduction is delivered through Adaptive ANC 3.0 and a 4-stage noise cancelling system, while detailed audio is produced by 40 mm double-layer diaphragm drivers with Hi-Res Audio and LDAC support. With up to 70 hours of playtime, fast charging, Bluetooth 6.1 dual connection, 3-mic AI calling, Transparency Mode, wearing detection, built-in white noise, and extensive soundcore app customization, a feature-rich wireless listening experience is provided in a comfortable, travel-ready design.

Recently Viewed Products

No Recently Viewed Products