Mimosa B11 Point-to-Point Backhaul Radio 10.0–11.7 GHz

The Mimosa B11 point-to-point backhaul radio (10.0–11.7 GHz) is built for modern internet-era backhaul, with support for adapting to variable upstream and downstream bandwidth requirements. It is designed to help meet high-throughput IP performance needs while also addressing low-latency demands. The B11 provides max throughput up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY) and 750 Mbps IP aggregate running in TDMA-FD mode typically required in ETSI markets. With a low latency of < 1 ms and TDMA/TDMA-FD operation, it’s suited to backhaul links where responsiveness matters. For installation in outdoor environments, this radio includes an outdoor UV stabilized plastic enclosure with an aluminum mounting panel and an outdoor ingress protection rating of IP67. It supports gigabit Ethernet (10/100/1000-BASE-T) and fiber capability through an included SFP cage, with the note that the radio accepts either copper Ethernet or SFP but does not support simultaneous operation. Management is enabled with a dedicated 2.4 GHz 802.11b/g/n radio for local access and hands-free 2.4 GHz Wi‑Fi management. Network and RF performance features include smart spectrum management and active scan monitoring/logs to monitor RF interference across channels (with no service impact).
Key Features
• Mimosa’s B11 backhaul radio is designed for the modern Internet era, adapting instantly to variable upstream and downstream bandwidth requirements at the lowest cost per Mbps in the industry
• Up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY), 750 Mbps IP aggregate running in TDMA-FD mode typically required in ETSI markets
• 4x4: 4 MIMO OFDM up to 256QAM
• 10000-11700 MHz restricted by country of operation
• System Lightning & ESD Protection
• Enclosure Characteristics
• Outdoor UV stabilized plastic Aluminum mounting panel
• Direct connect to circular dual polarized antenna
• Single connection ethernet or fiber
• Outdoor Ingress Protection Rating
Specifications
• Max Output Power
• 87 dBm @ 80 MHz
• 90 dBm @ 40 MHz
• 93 dBm @ 20 MHz
• 30 W
• 48 V DC 802.3 at compliant power injectors
• PoE Power Supply
• Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection
• Height: 260 mm (10.2") Width: 158 mm (9.6") Depth: 70 mm (2.8")
• Weight
• 9.89 Kg @ 160 km/h (21.8 lbs @ 100 mph)
• IP67
• 40°C to +55°C (-40°F to 131°F)
• SFP Cage included Radio accepts either copper Ethernet or SFP but does not support simultaneous operation
• Hands-Free dedicated 2.4 GHz Wi-Fi management radio
• Specifications
• Reference: NETWORK L12
• Brand: Mimosa