Xiaomi Dust Mite Vacuum Cleaner 2 Pro

The Xiaomi Dust Mite Vacuum Cleaner 2 Pro is designed for powerful and hygienic cleaning of mattresses, sofas, bedding, blankets, toys, and other fabric surfaces. A high-performance motor is used to generate up to 16kPa hurricane suction power, while up to 72,000 high-frequency taps per minute are delivered to help dislodge dust mites, dead skin flakes, dust, and other embedded debris. With a wide 21.5cm nozzle and a 49mm anti-tangle spiral roller brush, larger fabric surfaces can be cleaned efficiently.

A multi-action mite removal system is provided through LED UV sterilization, ultrasonic mite disruption, and hot-air drying at up to 65°C. Dust mite conditions are monitored through a built-in smart sensor, and suction power can be adjusted automatically according to the detected mite index. An upgraded dual dust compartment, 6-stage filtration system, and 0.8L transparent dust container are used to maintain smooth airflow, reduce filter clogging, contain fine particles, and minimize secondary pollution.

Key Features

• 16kPa Hurricane Suction Power: Dust mites, dead skin, dust, and allergens embedded within mattress and fabric surfaces are powerfully extracted by the high-performance motor.
• 72,000 Taps per Minute: Up to 72,000 high-frequency taps per minute are produced by the independent roller brush motor to loosen mites and debris before they are immediately suctioned away.
• 21.5cm Wide Cleaning Nozzle: A wide 21.5cm nozzle is provided so beds, mattresses, sofas, and other large surfaces can be covered more efficiently.
• 49mm Anti-Tangle Spiral Roller Brush: A large 49mm roller brush is used to improve cleaning efficiency, while its spiral design is intended to minimize hair entanglement. Hair entanglement cannot be completely prevented.
• LED UV Sterilization: An upgraded LED UV light is used to help eliminate bacteria from mattresses and fabric surfaces. For safer operation, the UV light is automatically switched off when the vacuum cleaner is lifted.
• Ultrasonic Mite Disruption: Targeted ultrasonic waves are used to disrupt dust mites' reproductive cycles, providing an additional layer of mite control alongside UV treatment.
• 65°C Hot-Air Drying: Hot air of up to 65°C is delivered to help remove moisture from bedding and mattress fabric surfaces. Conditions favorable to mite growth can therefore be reduced while fabrics are left feeling dry and comfortable. This function is not intended to replace a tumble dryer.
• Up to 99% Mite Removal Rate: A mite removal rate of up to 99% can be achieved under specified test conditions and operating modes.
• Up to 99.9% Sterilization Rate: Staphylococcus aureus, Escherichia coli, and Candida albicans can be effectively reduced, with a sterilization rate of up to 99.9% achieved under specified test conditions.
• Smart Dust Mite Detection: The dust mite index at the air inlet is continuously monitored by the integrated mite sensor, allowing cleaning conditions to be identified in real time.
• Automatic Suction Adjustment: In Smart mode, suction power is automatically adjusted according to the detected mite concentration, allowing both light and heavy mite presence to be handled efficiently.
• LED Status Display: Dust mite levels, cleaning modes, and operating information are clearly displayed. A green light indicates light mite presence, yellow indicates moderate presence, and orange indicates heavy presence.
• Upgraded Dual Dust Compartments: Cyclonic filtration and dust containment are separated through a dual-compartment system. Mites, hair, and debris are efficiently collected while filter and air-vent clogging is reduced to help maintain suction performance.
• 0.8L Transparent Dust Compartment: A large transparent dust container is provided to reduce the frequency of emptying while allowing the collected debris level to be easily checked.
• 6-Stage Precise Filtration: Fine dust and emissions are contained through multiple filtration stages, helping to reduce secondary pollution.
• 99% Full-Unit Filtration Efficiency: High filtration efficiency is provided to help maintain cleaner air emissions during operation.
• Three Cleaning Modes: Gentle, Smart, and Strong modes are included so cleaning performance can be adapted to different fabrics and applications.

6-Stage Filtration System

1. Air Inlet Cotton Filter: Large particles are captured before they can enter the motor.
2. Stainless Steel Filter: Hair and additional large particles are intercepted.
3. Cyclonic Filtration: Centrifugal force is used to separate debris through cyclone action.
4. Folded Filter: Fine dust particles as small as 0.3μm are targeted.
5. Dual Dust Compartment Filtering: Filtration and debris collection are separated to reduce filter clogging.
6. Air Outlet Cotton Filter: Cleaner emissions are produced by filtering the outgoing air.

Cleaning Modes

Gentle Mode: Designed for everyday cleaning of softer fabrics, including blankets and toys.

Smart Mode: Suction power is automatically adjusted according to the detected mite concentration for convenient everyday cleaning.

Strong Mode: Maximum cleaning performance is provided for deep cleaning of multi-layered fabrics such as mattresses and sofas.

Convenient Design Features

• One-Press Dust Compartment Removal: The dust compartment can be quickly detached for easier and cleaner emptying.
• Removable & Washable Components: The dust compartment, stainless steel filter, and filter can be detached and washed. All washed components should be completely dried before being reinstalled.
• Easy Filter Maintenance: Depending on usage, the filter should be cleaned every 5–6 uses and replaced every 2–3 months.
• Roller Brush Viewing Window: The operating status of the roller brush can be visually checked during cleaning.
• Smart Sensor Maintenance: The dust mite sensor window should be cleaned regularly, as accumulated dust may affect detection accuracy.

Specifications

• Product Name: Dust Mite Vacuum Cleaner
• Product Model: E401HW
• Rated Power: 500W
• Rated Voltage: 220–240 V~
• Rated Frequency: 50–60 Hz
• Noise Emission Level: ≤80dB(A)
• Suction Power: Up to 16kPa
• High-Frequency Tapping: Up to 72,000 taps/min
• Nozzle Width: 21.5cm
• Roller Brush Diameter: 49mm
• Hot-Air Temperature: Up to 65°C
• Dust Compartment Capacity: 0.8L
• Mite Removal Rate: Up to 99%
• Sterilization Rate: Up to 99.9%
• Full-Unit Filtration Efficiency: Up to 99%
• Fine Dust Filtration: Targets particles as small as 0.3μm
• Cleaning Modes: Gentle / Smart / Strong
• Product Net Weight: 2.4kg
• Product Dimensions: 287 × 268 × 225mm

Package Contents

• Dust Mite Remover Main Unit ×1
• User Manual ×1
• Warranty Notice ×1

The Xiaomi Dust Mite Vacuum Cleaner 2 Pro is built as a specialized mattress and fabric vacuum cleaner for households where deeper cleaning is required. By combining 16kPa suction, 72,000 taps per minute, LED UV sterilization, ultrasonic mite disruption, 65°C hot-air drying, smart mite detection, and 6-stage filtration, dust mites and embedded debris can be targeted through multiple cleaning methods. Its dual dust compartment, three cleaning modes, washable components, and smart suction adjustment also allow regular mattress, sofa, bedding, and soft-fabric cleaning to be carried out more conveniently.